Custom · Camera

Camera bodies.
Lens mounts.
Optical-grade.

Custom camera housings for cinema cameras, scientific imaging, surveillance, action cameras, broadcast equipment. CNC-machined aluminum and titanium with optical-grade tolerances and weatherproof sealing.

Camera Housings Quote Consumer electronics CNC

CNC machined IP67 sealing Optical Ra 0.4 Weight optimized

01 · Camera housing capabilities

What we make.

Camera housings combine optical precision, structural strength, and environmental sealing in lightweight aluminum or titanium structures.

02 · Sealing & environmental

Environmental protection.

FAQ

Camera Housings questions.

6061-T6 most common (good machinability, lightweight, anodizes well). 7075-T6 for higher strength. Magnesium AZ91D for ultra-lightweight. Titanium for premium. POM (Delrin) for non-structural panels.

IP66 (rain), IP67 (immersion 1m for 30 min), IP68 (continuous immersion to specified depth). Specify per use environment. We design O-ring grooves and verify with leak testing.

Lens flange focal distance critical: ±0.02 mm typical. Mount face flatness 0.01 mm. Concentricity to optical axis ±0.025 mm. CMM verified.

Prototype 1-3 pcs CNC machined, $300-2000 per piece depending on complexity. Production volumes with tooling investment for cast/molded components reduces per-part cost significantly.

Custom anodize colors, laser engraving for logos, painted custom colors. Surface finish from matte to mirror polish.

Tested per customer depth spec. Wall thickness calculations + safety factor 1.5-2×. Hydrostatic testing to verify rating before delivery.